Gaggenau Vario 400 Series 30" Stainless Steel Frame Induction Cooktop

Cooking Zones

• One unique cooking surface allows for cookware as small as 3" and as large as 13" x 21"
• Up to 5 items of cookware can be placed simultaneously on the cooktop

Operation

• Easy to use colour graphic TFT touch display with use indications
• Electronic power control in 17 output levels

Features

• Cooking sensor function
• Professional cooking function
• Dynamic cooking function
• Teppan Yaki function
• Booster function for pots and pans
• Keep warm function
• Cooking timer for each cooking position
• Information key with use indicators
• Home network integration for digital services (Home Connect) wireless via WiFi

Planning Notes

• Depending on the type of installation (surface-mounted or flush-mounted), the specific definition of the cut-out must be observed
• If combining several appliances with at least one cover, the filler strip VA 450 is required to compensate for the depth of the appliances without the appliance cover
• If combining several Vario appliances of the 400 series, a connection strip VA 420 must be placed between the appliances. Depending on the type of installation, the corresponding connection strip must be provided
• In the cut-out, the installation system requires the side edge to be at least ⅜" (10mm) for surface mounting and at least ½" (13 mm) for flush mounting. Ensure a continuous cut surface of 90°
• The bearing capacity and stability, in the case of thin countertops in particular, must be supported using suitable substructures. Take into account the appliance weight and additional loads
• Flush installation is possible in countertops made of stone, synthetics or solid wood. Heat resistance and watertight sealing of the edges must be observed. For other materials, please consult with your countertop manufacturer
• he groove must be continuous and even, so that uniform placing of the appliance on the gasket is ensured. Do not use discontinuous lining
• The joint width may vary due to size tolerances of the combinations and of the countertop cut-out
• If installing several appliances in individual cut-outs allow for a division bar of minimum 1 ³¹⁄₃₂" (50 mm) between the individual cut-outs
• Operates with magnetic (induction) iron pots and pans only. For an optimal heat distribution, the use of flat bottom cookware is recommended
• The wok pan WP 400 001 cannot be used with this appliance
• Intermediate shelf is recommended, but should be removable for customer service needs
• Appliance can be snapped into the countertop from above.

Useful Documents